We offer a complete line of ring and pinion gears plus rear end parts for the DANA 44 differentials. You can purchase high quality ring and pinion sets in various ratios, high quality rear end bearing overhaul kits including pinion bearings, pinion seal, crush sleeve, pinion nut, shims, ring gear bolts, marking compound and gasket. This differential was utilized by Chrysler in their pickup line starting in 1969 and Jeep line starting in 1967 including the J10, Wagoneer, CJ5 and Cherokee. International used in the pickup line and Scout from 1966 to 1980, it is also found in some Ford applications Bronco, F-100, F150, early Thunderbirds 1955 to 1956 and the Corba 1963-1967. GM used this very popular differential in their K10 and K30 pickups from 1960 to 1990 and it was even used in their Corvette line between 1980 and 1982. Our inventory includes ring gear and pinion sets, including aftermarket and OE gear sets. We are also able to supply axles, carriers, cases, spider and side gears. Positraction units we offer include Lockrights by Powertrax, Auburn, Detroit Lockers, Trac Loc and ARB air lockers. We are a Dana Spice volume distributor and offer a complete line or ring gear and pinions up to and including the large Dana 80 differential. Specifications are provided below to assist you in the identification and setup as well as torque spec.’s required for rebuilding your Dana 44 differential.

We can provide ring gear and pinion kits, for replacing current ratios or changing differential ratio for optimizing your performance, in addition to ring and pinion gear sets we offer differential bearing kit, carrier or case replacements including spider and side gear (internal kits). Positraction units and axles are also available to upgrade your existing differential assembly.

Along with our quality parts you have access to applications information for available ring and pinion ratios, information to assist you in identification of the differential that you have. Free information on ring and pinion installation is provided alone with specification and carrier/case breaks when you are considering gear ratio changes. You can review applications available to assist you with selection of the specific positraction unit that you may need to improve your performance.

Ring and Pinions Sets Cases, Bearing kit and Misc Parts Positraction Units

Purchase the parts at drivetrain.com and receive free installation technical support by telephone! Yes real technicians with many years experience, not just a salesperson.

Other Dana Differential Information Dana 30 Information and parts. Dana 35 Information and parts. Dana 60 Information and parts. Dana 70 Information and parts. Dana 80 Information and parts.

Applications Model Year   Model Year Chevrolet K10, 25 F 60-90   IHC Scout Front 72-80 Chevrolet K30, 35 F 67-76   IHC Scout Rear 68-80 Corvette 80-82   IHC 100 150 200 1100 1110 1200 1210 F&R 66-75 Chrysler W100, 150, 200, 300 & 350 F 69-96   Jeep C101 R 67-72 Ford Bronco F 71-96   Jeep Wagoneer F 74-83 U-100 Front 71-78   Jeep J10 20 Front 74-86 Ford F100 F150 4X4 R 67-78   Jeep CJ7 F&R 67-75 Ford F150 Front 75-78   Jeep Comanche R 76-92 Ford F250 Front 77-90   Jeep Grand Wagoneer Front 84-92 Ford F100 F150F 78-90   Jeep Scrambler R 72-75 Cobra 63-67   Jeep Wagoneer 72-79 Thunderbird 55-56

9-3/8" 10 HOLES OVAL Gasket Pattern SPECIFICATIONS Ring Gear Diameter 8.5" 10 3/8" X 24 RH Threaded Bolts PINION Diameter 1.376", 26 Spline CASE: 3.73 & Down, 3.92 Numerically Higher 8620 Material Heat-Treated 19 Spline Rear Axles on Jeep to 1970 30 Spline Front & Rear Axles Assembly Specifications: Cover Bolt Ft. Lbs. 30-40 Pinion Brg. Preload In. Lbs 20-40 Pinion Nut Ft. Lbs. 200-220 Ring Gear Backlash .005-.008 Ring Gear Bolt to case Ft. Lbs. 45-60 Side Brg. Caps Ft. Lbs. 70-90 Instructions for setting up ring and pinion backlash.

DANA 44 Ring Pinions

Part Number				Ratio		Teeth	Price
706017-1X		Rear		3.07		43-14	$255.68	Your gears run cooler and last longer! Order above high performance synthetic oil and friction additive combo kit at time of order for ring and pinion or bearing overhaul kit and pay only $36.76. Quality guaranteed performance
706017-2X		Front or Rear		3.31		43-13	$276.26
707240-5X		Front Rev		3.50		42-12	$233.11
707240-6X		Rev		3.54			$315.16
706017-3X		Front		3.54		46-13	$241.58
707020-3X		Front *		3.54		46-13	$240.82
706017-3X		Rear		3.54		46-13	$241.58
707240-6X		Rev Ring & Pinion		3.54		46-13	$266.81
707381-3X		Large Pinion		3.55			$383.46
MW D44-373F		Front Rev		3.73			$170.70
76542-5X		Large Pinion		3.73			$237.87
707381-4X		Large Pinion		3.73			$268.89
706017-4X		Front or Rear		3.73		41-11	$264.54
80186-5		ThickLarge Pinion		3.91			$202.64
707338-2X		Crush Sleeve Style		3.92			$248.66
706017-11X		Front		3.92		47-12	$276.68
707020-5X		Front *		3.92		47-12	$233.38
707338-3X		Crush Sleeve Style		4.09			$246.48
706017-5X				4.09			$234.46
706017-5X		Front		4.09		45-11	$234.46
707020-4X		Front *		4.09		45-11	$228.54
707240-9X		Front Rev.		4.09		45-11	$247.58
24649-5X		Ring & Pinion Only		4.09		45-11	$200.24
74720-5X		Thick		4.10			$237.38
707309-1X		Thick		4.10			$269.96
706017-10X		Front or Rear		4.27		47-11	$246.62
706017-21X		Front or Rear		4.55		50-11	$236.84
MW D44-456R		Front Rev		4.56			$170.69	The Dana Ring and pinion kits inclued high qualitypinion bearings, pinion bearing seal, gasket, pinion and carrier shims, pinion nut, marking compound, crush sleeve and ring gear bolts. Carrier bearings are sold separately.
75723-5X		Thick		4.56			$237.24
707309-5X		Thick		4.56			$272.18
706017-22X		Front or Rear		4.89		44-9	$226.95
706017-8X				5.38			$236.44
706017-8X		Front or Rear		5.38		43-8	$236.44
706017-9X				5.89			$268.89
706017-9X		Front or Rear		5.89		53-9	$268.94
WCDD44TR 4.11. 4/56. 4/88 or 5.13							$208.00	New Thick Gear Ring and Pinion kits for for your New Jeep Liberty, use your existing case.
When ordering Dana/Spicer Differential Parts provide bill of material number. This number is stamped on the right hand side axle tube. It's a number like 603XX-X, 604XX-X or 605XX-X. With this number we can tell you exactly which components the factory used in the assembly of your differential You get the right parts the first time!

DANA 44 Differential Parts

Part Numbers	Description			Price
25806X	3.92 & Up, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$99.42
25808X	3.73 & Down, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$101.81
7007382X	3.73 & Down, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$198.42
706020X	3.73 & Down, Open empty case			$156.72
706021X	3.92 - 5.89 Case Loaded			$181.52		This new Redline synthetic gear oilis recommended for replacement when replacing ring gear pinion sets and or bearings, your cost only $9.95 qt. See other Red Line Oil Products that we recommend.
706021X	3.92 & Up, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$181.52
706024X	2.72 - 3.73 Case Open empty case			$64.74
706024X	3.73 & Down, , Open empty case			$64.74
706025X	3.92 - 5.89 Case Open empty case			$64.74
706025X	3.92 & Up, , Open empty case			$64.76
706921X	3.73 & Down, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$153.8
706947X	3.92 & Up, Open empty case			$64.04
707021X	3.73 & Down, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$142.26
707022X	3.92 & Up, Open loaded carrier incl. spide/side gears, cross shaft & thrust washers			$149.56
707116X	2.72 - 3.73 Case (Empty) Trac-Loc			$122.06
707193X	3.92 - 5.89 Case (Empty) Trac-Loc			$103.86
DTS28RMK	Bearing/Overhaul Kit Early			$107.87		Note: Ford has installed two types of bearings in the Dana 44IFS, recommend disassembly before ordering.
DTRA28LRMK	Bearing/Overhaul Kit Late			$110.20
SA-35-2066	Bearing/Overhaul Kit (Reverse gear setup) Timken			$125.97
706027X	Internal Parts Kit 30 Spline			$97.58
706031X	Inner Pinion Bearing			$17.32
706030X	Outer Pinion Bearings			$12.32
BCA-A-37	Carrier Bearing			$22.98
PA5711	Axle Superior Jeep Cherokee & TJ 86-87, 25% to 30% Stronger than stock			$159.00		Superior Alloy Induction Hardened Rolled Splines Kits Complete with Studs, Bearings and Seals
PA5712	Superior Jeep Cherokee & TJ 86-87, 25% to 30% Stronger than stock			$159.00
EV44LF	Axle Kit Bronco Front 71-77 30 spline complete with Big U-joint			$214.99		Big U-joint provides for extreme duty. Kits include bearings, studs and seals.
EV44RF	Axle Kit Bronco Front 71-77 30 spline complete with Big U-joint			$214.99
706352X	Trac-Loc Clutch Pack			$51.26
706926X	Trac-Loc Gear & Clutch Pack			$232.83
707115X	Dana Trac-Loc 2.72 - 3.73 IFS.			$308.16
707150X	Dana Trac-Loc 3.92 - 5.89 IFS			$354.39
707147X	Dana Trac-Loc 2.72 - 3.73 IFS.			$311.98
707199X	Dana Trac-Loc 3.92 - 5.89 IFS			$313.96
DTSDana 44	Differential Cover Front and rear Jeep, Ford, GM, Dodge and Scout 2.5 quarts to 6 quarts Increase the fluid capacity, you will find that the fluid will run 15 to 20 degrees cooler.			$250.00

Positraction Differential Assembly Options

Description	Part Number	Price	Whats the difference in Positractions? Check out Differentials whats the Difference
ARB 35 Spline 3.92 Up	RD109*	$1169.62
ARB 33 Spline 3.92 Up	RD113*	$1115.80
ARB 30 Spline 3.92Up	RD116*	$1115.80
ARB 30 Spline 3.73 Down	RD117*	$1115.80
Dana Trac-Loc 2.72 - 3.73	707115X	$308.16
Dana Trac-Loc 3.92 - 5.89 Note (1)	707150X	$354.39
Dana Trac-Loc 2.72 - 3.73 Note (2)	707147X	$311.98
Dana Trac-Loc 3.92 - 5.89 Note (2)	707199X	$313.96
Detroit Locker 2.72 - 3.73	187SL-12B	$569.69
Detroit Locker 3.92 - 5.89	187SL-12A	$569.69
Detroit Locker (IFS) 2.72 - 3.73	187SL-16D	$569.69
Detroit Locker (IFS) 3.92 - 5.89	187SL-16C	$569.69
LockRight Chevy, Dodge & Ford Front 67-98. Jeep CJ Rear (30 spline)	2410	$329.94
LockRight Jeep CJ Rear (19 spline)	2413	$349.43
LockRight Jeep (10 spline)	2415 or 2416	$350.28
Powertrax no-Slip 27 spline open	92-0444-2700	$436.19	Don't get stuck!
Powertrax no-Slip 30 spline open	92-0444-3000	$436.19	Don't get stuck!
Powertrax no-Slip 30 spline Trac-Loc Case Note (1)	92-0444-3020	$453.39	Don't get stuck!
* Air Compressor 12 Volt Compressor	CKMA12	$309.38
Note (1) Side gears are not machined for C-Clip Axles Note (2) Side Gears are Machined for C-Clip Axles

In addition to the Dana 44 differential parts and accessories listed here, we also provide an impressive list of automotive after market products for car, pickup truck, SUV and 4wd repair parts and accessories that includes rear end covers, ring and pinion gears, OE clutches and heavy duty performance clutches, diesel gauge kits, exhaust brakes, re manufactured manual transmissions and both manual and automatic overhaul kits. Other products we offer for the RV recreational vehicle market include REMCO drivelinedisconnects, tow bar and baseplates and auxiliary overdrive units to improve vehicle performance and save fuel. We have a complete 4 wheeling drivetrain product line including complete differential assemblies, limited slip and other solid locking positractions. We offer transmission conversion kits including the NV4500 and NV5600 as well as replacement kits for light duty GM and Jeep transmissions. You may be interested in visiting our Ford and Powerstroke Diesel page, Dodge Ram and other Jeep pages for detailed information.

Watch for future additions of new products to be added to our on-line catalog including advanced wheels, tires, engine tune-up kits and other accessories.

Our large question and answer data base it's provided for you it provides additional information that may be of interest to you. Our easy to use vehicle information data base is cataloged by vehicle manufacture, part or component, to review just select Q&A data.

From time to time we offer specials discounts to our registered Internet customers, click below to register and receive advance notice of new products, special bonus offers and to be eligible for our free random gift drawings, we protect your e-mail address we, don't sell, trade or abuse it.

If it's a part and or a components under your vehicle we can supply it!

To order you can complete our easy to use secure electronic order form,

Or you can call the order desk at 1-800-216-1632, talk to a knowledgeable technician.

Considering purchasing parts from drivetrain.com and have questions contact Tech line at 1-702-876-3100 or send e-mail.

Drivetrain Specialists of Las Vegas - Las Vegas NV, 89102

Need Drivetrain Parts for your Import Vehicle see:

Automatic Transmission Parts	High Performance Clutch Kits	Manual Transmission Overhaul Kits & Parts
Automatic Transmissions	Manual Transmissions

A Division of Drive Line Service of Las Vegas
Las Vegas Nevada, 89102
(702) 876-3100