700R4 Hydra-Matic Transmission (MD8) General Motors

Considering overhauling your Chevrolet transmission or just need GM 700R4 parts? We provide a large inventory selection for 700R4 automatic transmission overhaul kits, parts including steels, kits, solenoids, filters, solenoids. This wide selection of parts are used in the GM 700R4 automatic transmission in GM model years 1982 to 1993 Chevy light duty trucks and passenger cars.. In addition to these kits we also supply torque converters, fluids, problem prevention kits and in most cases we can supply good take out hard parts and save you some money.

Free infomation is provided on parts illustrations, maintenance tips, overhaul tips and assistance in identifying just what automatic transmission you have in your vehicle. In addition a factory description and ratio information is available.

Parts Illustration Troubleshooting/Overhaul Manual

Maintenance Tips Overhaul Tips

Remanufactured Automatic Transmission What transmission do I have?

Type:

The following components are available to enhance Shifting
Part Number	Qty Req	Description	Years	Price
ST51944	1	Shift Calibration kit	1982-1993	$60.94

The following electronic components may or may not be required.
Part Number	Qty Req	Description	Years	Price
51870U	1	TCC Solenoid	1982-1993	$30.95
51876E	1	Output Shaft Speed Sensor	1987-1995	$50.04

Torque Converter ---------- Torque Converter Problem & Information For this series transmission there are MANY different possibile torque converters (not all listed here). When rebuilding your transmission it is always recommended that you change the torque converter. When ordering the torque converter you must supply the four digit code off of the existing unit (located on a sticker). Some of the possibities are:					Torque Converter Installation/Preparation
Code	Order Part Number		Application	Price
C33	NATC33C		Small Bowl 10" Code: HD, HJ, HE, SJ 1980-96: 2.8L, 3.1L and 3.4L low stall	$20123
C35	NATC35		Small Bowl 10" Code: HA, HB, HK, HZ, SZ 1980-1996 2.5L, 2.8L high stall	$156.33
The following modifications are also available for above converters: HD Heavy Duty Designed for heavy duty applications with stock stall speeds. Caged Allison bearing to resist heat & fully brazed to resist loads. Dummy Dummy Stock converter with the lockup function removed. Remember to install the non-lockup conversion valve part number 37921-TG
C21	NATC21		Large Bowl 12" Code: CG, CF, CK low stall 1980-84E, 5.oL, 5.7L Non-turbo, pads may be round or square	$219.10
C24	NATC24		Large Bowl 12" Code: CB, CE high stall 1980-1984E 4.3L, 5.0L turbo, pads may be round or square, use C24HP in Corvette	$145.76
C40	NATC40		Large Bowl 12" Code: DG,DF, DK, low stall, 1984L-1992 5.0L, 5.7L: Use C40HDT in trucks 1984L-1994 pads may be round or square	$203.25
C48	NATC48		Large Bowl 12" Code: DB, DE, high stall, 1984L-1994 4.3L, 5.0L, Turbo, Use C48HP in Corvette, pads may be round or square	$156.33	Be sure to use our transmission cooling line flush in order to remove debris. Your cost is $11.88 order Kooler Kleen.
C40HDT			Large Bowl 12" Code: DG, DF, DK, low stall 1992-1994: 5.0L, 5.7L, Trucks 1987-1994: will retro to 1984L Heavy duty bearing and turbine hub	$203.25
C48HDT			Large Bowl 12" Code: DB, DE 1992-1994: 4.3L, 5.0L Turbo; use C48HDTHP in Corvette: will retro to 1984L Heavy duty bearing and turbine hub	$202.74
C37			Large Bowl 12" Code: 1980-E84; 6.2L Diesel May us C21SQ (square pad) design as an upgrade	$156.33
C39			Large Bowl 12" Code: 1984L-86 6.2L Diesel May us C21SQ (square pad) design as an upgrade	$156.33
The following modifications are also available for above converters: HD Heavy Duty Designed for heavy duty applications with stock stall speeds. Caged Allison bearing to resist heat & fully brazed to resist loads. RV Low Stall Reprogrammed for towing applications & fuel economy. Caged Allison bearing to resist heat & fully brazed to resist loads. HDT Heavy Duty Turbin Designed for heavy duty applications with stock stall speeds. HD+Flanged turbine hub to prevent twisting. HP High Performance Factory performace stator. Designed for the Corvette and Buick Grand National. Caged Allison bearing and fully brazed vanes. Dummy Non-lockup Stock converter with the lockup function removed. Remember to install the non-lockup conversion valve part number 37921-TG We supply only high quality remanufactured torque converters, cost + $50.00 core deposit (some may be higher).

Troubleshooting/Overhaul Manual

These manuals are typically 50 to 85 pages and contain both troubleshooting information and data to support overhaul, such as electronic data, illustrations and specific procedures and specifications. These are professional shop manuals which will give you the capability to diagnose problems, and evaluate repair options. If you decide to have your transmission overhauled at a local shop you will be armed with detailed knowledge of problems and potential fixes. This information should allow you to get the best deal, Always compare pricing for labor. If you supply the parts and ask for warranty in the end you will save money.

Fluid Recommendation:
Red Line high-Temp ATF Our Red Line high-Temp ATF --is a synthetic GL-4 gear oil for use where Dexron III is recommended. A higher viscosity allows optimal operation at 70 degrees higher temperature, providing better torque converter efficiency. Perfect for heavily-loaded vehicles. Superior stability allows high-temperature operation without varnishing valves and clutches. nverte Recommended for use after overhaul, mixing with existing fluid is not recommended! Our LubeGard "automatic transmission protectant" is recommended as an additive to improve transmission life and maintenance.		Red Line high-Temp ATF your cost $11.95 qt.

Master Rebuild Kit

Typically contains gaskets and rubber kit, sealing rings, metal/rubber clad seals, friction plates, steel plates* , front and rear bushings, filter and where applicable Band* and/or Modulator*.

*not included if listed separately

Maintenance Tips

Regular maintenance cycles and continued checking of fluid levels is critical to the life of your transmission. Operating temperature is the single most critical parameter effecting the life of the transmission. Keep the temperature down and fluid fresh helps the units typically last a very long time under normal driving conditions (no teenagers involved). We can supply a couple of aftermarket products to help you get the most out of your transmission:

Auxiliary Transmission Oil Cooler.

The Truco part number LPD4451 is an excellent auxiliary oil cooler to provide additional cooling capacity. The kit includes all parts required to mount the unit and connect to existing cooling lines. This is a typical do it yourself project. The unit typically mounts in front of the radiator. Your cost on this transmission life saving product is $54.94 plus shipping and handling.

Fluid Additive

Generally we don't recommend additives but we have found that the Lubegard "Automatic Transmission Protectant" at only $13.93 + S&H can:

• Prevent overheating, reducing transmission temperatuare up to 40 degrees F.
• Extend fluid life
• Eliminates transmission fluid foaming and oxidation
• Reduces wear throughout the transmission
• Elimates clutch chatter and torque converter shudder
• Softens and modifies harsh shifts
• Provides for smoother shifting
• Eliminates objectionable noises during shifts
• Keeps valves and governors free and frees stuck valves in valve bodies
• Raises the thermal and oxidative stability
• Only product that increases the fluids ability to transfer heat
• Contains no Ash

Always consult and follow owners manual for maintenance intervals and requirements.

ult and follow owners manual for maintenance intervals and requirements.

Overhaul Tips

Before you tear into the transmission, we suggest you first study the troubleshootin/overhaul manual, add a bottle of our "Automatic Transmission Protectant" and put a few miles on the vehicle. This just might free valves and governors that are possible stuck in valve bodies. Be sure to get computer trouble code(s), see owners manual for technique to acquire malfunction codes. This will be a great assistance in diagnosing possible problems.

Twenty-One Steps to Successful Transmission Repair:

1) Do your research locate any technical bulletins pertaining to your transmission, ask your dealers parts department for bulletins.

2) Clean the entire transmisssion, including the valve body.

3) Check pump, valve body and case for warpage.

4) Flat file pumps, valve bodies, and cases. Just a few strokes with the file to knock off high spots and handling burrs.

5) Check all pump gear clearances.

6) Check planet pinion end play and side to side motion.

7) Soak all planet assemblies.

8) Soak all friction materials for 15 - 30 minutes.

9) Make sure all steels are in usable condition or replace. Do not sand or tumble steels when used against High Energy friction materials.

10) Inspect all surfaces upon which a band will ride.

11) Replace all rotating oil control rings.

12) Check all oil control rings and rubber products in the bores for proper fit.

13) Check all major support bushings and bushings that control lub oil.

14) Pre-lubricate all bushings and thrust washers.

15) Pre-lub pumps.

16) Pre-fill torque converter.

17) Use available manuals to ensure proper specifications and clearances.

18) Set correct clutch and band clearances.

19) Take the time to set the total end play.

20) Use a torque wrench on all pumps and valve bodies.

21) Always double flush the cooling and cooling return lines to the radiator to remove particles trapped there.

Take your time, take your time, take you time!

Torque Converter Information

Failue modes for torque converters manifest themselves in different ways, slow failue, i.e. loss of power over time, instant failure, i.e. input shaft spline failure. Following is a short list of problems, prossible causes:

The difference between stator design, look inside the converter at the larges set of splines (stator shaft splines). If the splines are split then the unit has a dual element stator. Do not interchange single element and dual element converters.

Torque Converter Installation/Preparation

Many torque converter problems can be avoided with proper preparation:

1) Pre-thread converter bolts by hand to make sure there is no sign of stripped threads.

2) Check and clean crankshaft thoroughly. Change crank spacer (if applicable).

3) Use 320 grit sandpaper or Emory cloth to remove any metal shavings on crankshaft.

4) Check converter for any damage that may have occured during shipping.

5) Pre-fill converter with a minimum of (1) quart of transmission fluid.

6) Clean all paint off the pilot using 320 grit emory cloth.

7) Apply grease, not transmission gel, on the pilot.

8) Check flexplate for cracks and be sure there is no more than .006" run out.

9) Make sure all engine dowel pins are in place and clean.

10) Make sure all electrical ground straps are properly connected.

11) Never, Never us an impact gun to install torque converter bolts. Driving a bolt into the converter cover will create a dimple on the lockup apply surface. Lockup clutch failure will occur when the lockup piston applies against and uneven surace. Grinding off on thread length from all lockup converter bolts is recommended to avert this type of failure.

In addition to the automatic transmission/transaxle parts and accessories, we also provide an impressive list of automotive after market products for car, pickup truck, SUV and 4wd repair parts and accessories that includes rear end covers, ring and pinion gears, OE clutches and heavy duty performance clutches, diesel gauge kits, exhaust brakes, re manufactured manual and automatic transmissions and both manual and automatic overhaul kits. Other products we offer for the RV recreational vehicle market include: REMCO driveline disconnects, tow bar and baseplates and auxiliary overdrive units to improve vehicle performance and save fuel. We have a complete 4 wheeling drivetrain product line including complete differential assemblies, limited slip and other solid locking positractions. We offer transmission conversion kits including the NV4500 and NV5600 as well as replacement kits for light duty GM and Jeep transmissions. You may be interested in visiting our Ford and Powerstroke Diesel page, Dodge Ram and other Jeep pages for detailed information.

Watch for future additions of new products to be added to our on-line catalog including advanced wheels, tires, engine tune-up kits and other accessories.

Our large question and answer data base it's provided for you it provides additional information that may be of interest to you. Our easy to use vehicle information data base is cataloged by vehicle manufacture, part or component, to review just select Q&A data.

From time to time we offer specials discounts to our registered Internet customers, click below to register and receive advance notice of new products, special bonus offers and to be eligible for our free random gift drawings, we protect your e-mail address we, don't sell, trade or abuse it.

If it's a part and or a components under your vehicle we can supply it!

To order you can complete our easy to use secure electronic order form,

Or you can call the order desk at 1-800-216-1632, talk to a knowledgeable technician.

Considering purchasing parts from drivetrain.com and have questions contact Tech line at 1-702-876-3100 or send e-mail.

Drivetrain Specialists of Las Vegas - Las Vegas NV, 89102

Need Drivetrain Parts for your Import Vehicle see:

Automatic Transmission Parts	High Performance Clutch Kits	Manual Transmission Overhaul Kits & Parts
Automatic Transmissions	Manual Transmissions