.

Fully integrated Coil Spring 4x4 suspension systems for Wrangler TJ 6 Cylinder Models 1997 and later

When only the best will do, EMU!

Is your Wrangler's suspension saging, does the Wrangler have handling problems and an uncomfortable ride these can be common concerns for vehicle owners with standard suspension. Our OME products addresse these problems OME eingineers have developed suspension systems that cater to your specific vehicle characteristics. OME does this via their renowned team of engineers, who design and test every element of the suspension system - a practice unique to OME. Our kits include carefully matched spring and shock combinations engineered to improve vehicle ride quality, handling and control under various loads. We recommend you change both shock and springs at the same time. Special attention is given to improving suspension travel without adversely affecting driveline and steering geometry. In most cases, multiple spring rates and shock valving characteristics are available for each application to accommodate vehicle variations and driving preferences. Although ride height and tire size are taken into consideration with each system, the emphasis is placed on vehicle performance and versatility.

By installing a fully integrated 4x4 suspension system, you can dramatically improve the safety and handling of your vehicle. Old Man Emu manufactures these suspension replacement parts in Australia. These suspension parts are designed to replace the original factory springs, shocks, polyurethane bushings, steering stabilizer for some application Ubolts and shackles, greasable shackles & pins are available. Old Man Emu components are designed to use your existing mounts.

You purchase our EMU Nitrocharge Shock Absorbers and you get:

Giant 18mm Chromed Shaft — Indestructible for rugged off roading. Induction hardened then hard chromed to a superfine finish. Nitrogen Gas — The gas pressure keeps the oil cohesive under all conditions. Twin Tube Design — New 33% thicker outer tube insures that rocks do not damage internal operating components. This design also allows for a greater volume of oil which keeps the shock cooler. 35MM Seven Stage Compression Valve — Delivers all the subtleties of compression rates for the best ride and handling. Check Valve Seal — The latest in seal technology, this shaft seal significantly improves gas retention while offering excellent longevity. Glacier Bush — A Teflon coated rod guide bushing significantly reduces heat build up in the god guide area, developed for the Emu” off road racing program. Giant 35mm Teflon Banded Piston — A new four stage coil sprung rebound valve system to control vehicle bounce. Supplementary Welds — On all mounting eves and pins for maximum shock absorber mount strength. Stoneguard — Protects oil seal and piston rod against stone and dirt damage. Warranty — 2 year 25,000 mile warranty for material and workmanship.

You purchase our advance designed EMU Coil Springs and you get:
	Shot Peened Coils— To reduce stress, which greatly enhance spring life. Double Scragged — To eliminate spring sag. Variable and Constant rate - Designs used to obtain optimum ride comfort and load carrying capabilities.

You purchase our advance designed Urethane Bushings and you get:
	Premium Grade — Not all bushings are the same EMU bushings are precision molded in captive molds to ensure exact tolerances for longer bushing life. Unique EMU Design — Clever lip seal and shoulder design prevents dirt penetrating between bushing shoulder and shackle face.

With EMU's Steering Dampers Feature the following advance design you get:

Coil Sprung 9 Stage Valving — For optimum performance 35mm Piston and Bore — Grater oil volume giving better damper performance. Twin Tube Design — Protects the internal components against stone damage. Steel Stoneguard — Protects the piston rod against stone damage. Foam Cell — Keeps the oil at the valving to prevent fade. Original Mounts — All mounts are of similar design to original dampers for ease of INSTALLATION.

In addition to providing lifts Old Man Emu Suspension enhances ride quality, articulation and longevity. Package includes polyurethane bushings springs, greasable shackles & pins, gas shocks and steering stabilizer (sway bar extenders when applicable). Below you will find information and suspension products for Wrangler with front and rear springs. For the front two different load ratings are provided stock/light with 2" of lift and heavy with 1.5" of lift. For the rear three different load ratings are provided light/stock with 2.25" of lift, medium with 2" of lift and heavy constant load rating with 2.0" of lift.

	Consistency OME coil springs are formed on precision mandrels and manufactured to the highest standards. A scragging process is performed before and after the coils are shot peened to reduce stress and prevent sagging.
	Diversity Constant and variable rate coils are available to suit a wide variety of applications – even those you thought were impossible.
	Quality Coil spring end configurations are designed to exact specifications guaranteeing perfect fitment to your vehicle, while a durable powder coat finish provides a quality appearance for years.

Old Man Emu suspension systems include carefully matched spring and shock combinations engineered to improve vehicle ride quality, handling and control under various loads. We recommend you change both shock and springs at the same time. Special attention is given to improving suspension travel without adversely affecting driveline and steering geometry. In most cases, multiple spring rates and shock valving characteristics are available for each application to accommodate vehicle variations and driving preferences. Although ride height and tyre size are taken into consideration with each system, the emphasis is placed on vehicle performance and versatility.

Below you will find detailed application information on both the front and rear suspension parts, springs, shocks and accessories components for your specific vehicle. You will note that springs and shocks are provided for different load rating, to support your specific application, allowing you the additional capability if you have changed the engine, installed a larger bumper or winch. If you haul heavier loads or you just want to replace the sagging OEM springs the Old Man Emu components are for you.

	Approx. Lift	Part No.	Qty	Price Each	Weight Each
FRONT
Stock/Light Load (0-90lbs)
Spring	2.0" (4)	OME932	2	$93.23 ea.	12
Shock		*N66/N66C	2	$102.92 ea.	8
Heavy Load (90-180lbs)
Spring	1.50" (4)	OME933	2	$93.23 ea.	12
Shock		N66	2	$102.92 ea.	8
REAR
Light Load/Soft Top
Spring	2.25"	OME941	2	$93.23 ea.	11
Shock		N67	2	$102.92 ea.	8
Medium Load/Hard Top
Spring	2.0"	OME941	2	$93.23 ea.	11
Shock		N67	2	$102.92 ea.	8
Heavy Constant Load (220lbs to GVM)
Spring	2.0"	OME942	2	$93.23 ea.	12
Shock		N67	2	$102.92 ea.	8
TO COMPLETE INSTALLATION
T-Case Spacer Kit		JWGK01 (1)	1	$88.37	1
Panhard Rod Bracket		FKWTJ02 (2)	1	$21.82	1
Bump Stop Spacer Kit		FK16 (3)	1	$21.91	1
Steering Damper		OMESD40	1	$92.14	6
OPTIONAL ACCESSORIES
Front 10mm Trim Spacer		OMEJGF10		$12.68	1
Rear 10mm Trim Spacer		OMEWTJPR10		$17.02	1
ALSO AVAILABLE
Front Extended Length Shocks		N66L (5)	2	$102.92	8
Rear Extened Length Shocks		N67L (5)	2	$102.92	8
Remarks:
(1) JWGK01 is mandatory to prevent driveline vibration.
(2) FKWTJ02 Panhard Rod Bracket is mandatory to ensure correct rear axle tracking
(3) FK16 spacer kit is mandatoryto prevent coil springs from becoming solid on full compression.
(4) Due to a variance in curb weight, 4 cylinder models may net slightly more lift than 6 cylinder models.
(5) N66L/N67L Extended Legth Shocks are for 3-5" suspension lifts only and are not intended for use with any Old Man Emu systems. Modified bump stps are required. * First part number gives firmer ride for: FRONT- Increased axle weight eg: diesel, bullbar, winch. REAR- regular load carriers and those who prefer a positive feel.
Important: FK16, FKWTJ02 & JWGK01 are all mandatory for proper installation. Failure to install any of these kits will void OME waranty. Installation Instructions

* Ground Freight charges will be added.

$25.00 minimum order.

In addition to the Jeep Wrangler performance suspension accessories listed here, we also provide an impressive list of automotive after market products for car, pickup truck, SUV and 4wd repair parts and accessories that includes rear end covers, ring and pinion gears, OE clutches and heavy duty performance clutches, diesel gauge kits, exhaust brakes, re manufactured manual and automatic transmissions and both manual and automatic overhaul kits. Other products we offer for the RV recreational vehicle market include REMCO drivelinedisconnects, tow bar and baseplates and auxiliary overdrive units to improve vehicle performance and save fuel. We have a complete 4 wheeling drivetrain product line including complete differential assemblies, limited slip and other solid locking positractions. We offer transmission conversion kits including the NV4500 and NV5600 as well as replacement kits for light duty GM and Jeep transmissions. You may be interested in visiting our Ford and Powerstroke Diesel page, Dodge Ram and other Jeep pages for detailed information.

Watch for future additions of new products to be added to our on-line catalog including advanced wheels, tires, engine tune-up kits and other accessories.

Our large question and answer data base it's provided for you it provides additional information that may be of interest to you. Our easy to use vehicle information data base is cataloged by vehicle manufacture, part or component, to review just select Q&A data.

From time to time we offer specials discounts to our registered Internet customers, click below to register and receive advance notice of new products, special bonus offers and to be eligible for our free random gift drawings, we protect your e-mail address we, don't sell, trade or abuse it.

Orders Shipped the same day!! Most credit cards accepted.

If it's a part and or a components under your vehicle we can supply it!

To order you can complete our easy to use secure electronic order form,

Or you can call the order desk at 1-800-216-1632, talk to a knowledgeable technician.

Considering purchasing parts from drivetrain.com and have questions contact Tech line at 1-702-876-3100 or send e-mail.

Drivetrain Specialists of Las Vegas - Las Vegas NV, 89102