Everything included for "do it yourself" service and installation.
We offer quality differential covers by Mag-Hytec, as you know heat can kill, it can cause deterioration of fluids and components. With the new differential covers, you can increase the fluid capacity, you will find that the fluid will run 15 to 20 degrees cooler. Cast in A356T6 aluminum covers feature increased lubricant and cooling capacity, and are equipped with a magnetic drain plug, 1/8 NPT temperature sender fitting, lube reference plug, and a magnetic dipstick for checking fluid level and condition. Dipstick, drain, and reference plug are MS 33649 and fitted with AS 568 O-rings, as is the cover gasket, which requires no sealant or gasket. All hardware is stainless steel, and the cover is texture-powder coated in black.
|Cover on display stand you can see the temp gauge input||Display cover showing fluid, dipstick and magnetized dipstick and drain plug.||Larger transmission pans are also available to assist in reducing transmission operating temperature. For more information .|
Routine axle maintenance without removing the cover.
The differential is easier to check and service these covers offer the following features:
- O' Ring seal, snapped into a inverted "V" groove for a positive seal without gasket or silicone.
- Knurled dipstick for quick removal, marked low/high to check level between service periods.
- Manufactured using finned aircraft aluminum housing for additional cooling capability.
- Magnetic drain plug and anodized aluminum dipstick with magnetic insert.
- 1/8 NPT temperature sending port, you can now monitor the differential temperature if desired. Unit ships with plug.
- Furnished hardware; plugs, cap screws and washers are stainless steel in most applications.
- Fits most factory suspension systems and aftermarket anti sway bars
- Calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level.
- Lube level reference plug.
These units fit most popular rear ends, we offer these advance products for the following differentials:
Fluid Capacity change from stock
|Dana 44||Front and rear Jeep, Ford, GM, Dodge and Scout, overhaul height 3.25"||Add 4 quarts|| |
|Dana 60DF||Dodge Front 1989 to 2002 |
on 2002 models check for vent tube on face of cover
|4.5 quarts|| |
|Dana 60FF||Ford F250 & F350 Front 1999 up||3 quarts to 6 quarts|| |
|Dana 70||Dodge Pre 1994 - all 2500 & 3500 |
Dodge 1994 to 2002 2500 automatic trucks
Some older GM
Ford 1985 and older - F250 and F350 trucks
Ford F350 Van
|6 quarts|| |
|Dana 80||Dodge 1994-2002 2500 5 speed transmission |
Dodge 1994-2002 3500
Ford Super Duty 1999 and up F350 & F450 Dually
|8 quarts|| |
|Dodge 12-9.25||Vans, Ram 1500, Durango's& some Dakotas, overhaul height 3 3/8"||4 quarts to 5 quarts|| |
|Dodge AA 14-10.5"||Pickup 2500 Automatic & Standard Diesel and Gas for the new American Axle Differential Part number AA14-10.5||6 quarts|| |
|Dodge AA-14-11.5"||Pickup 2500 & 3500 High Output Diesel for the new American Axle Differential Part number AA11.5||8 quarts|| |
|Dodge 14-9.25" Front||Dodge front 2003 to present 2500 and 3500 standard Diesel and High Output||4.5 quarts||$281.71|
|GM 10 Bolt 8.5"||GM 1970 up 1500 Truck, Suburban 1500 & 2500, Blazer, Vans & some Cars||1.5 quarts to 4 quarts|| |
|GM 14 Bolt 9.5"||Semi Floating Axle, Gm 1980 up 2500, 3500 trucks, vans suburban's. Check to ensure that you have Semi-Floating Axle, 3 5/8" overhaul height||2.5 quarts to 5 quarts|| |
|GM 14 Bolt 10.5"||Full Floating Axle, 1973 up 2500 & 3500, Check to ensure that you have Full-Floating Axle||3 quarts to 6 quarts|| |
|GMAA14-11.5||Full floating Axle GM HD 2500 & 3500, 2001 & later Duramax & 8Lt gas||8 quarts|| |
|Ford 10 Bolt 8.8"||F150, Ranger, Explorer, Bronco, Cars||2 quarts to 4 quarts|| |
|Ford 12 Bolt 9.75"||F150||5 quarts|| |
|Ford 12 Bolt 10.25"||2X4, 4X4 F250, F350, E250, E350, 1986 to present single rear wheel||3 quarts to 6 quarts|| |
|Ford F350 Dana 60 Front||Front F350 up to 1998||3 quarts to 6 quarts|| |
|Ford Dana 60FF Front||Ford front fits Dana 50's and Dana 60 earl 1980 to present F250, F350 and Excursions||4 quarts|| |
|Ford Dana 80||Ford Super Duty1990 to present (spec. chassis) |
Ford Super Duty F350 and F450 Dually 1999 and up
|8 quarts|| |
|Nissan||Titan Rear, 3.5" overhaul height||4 quarts|| |
DRIVE SAFELY and WEAR YOUR SEATBELT.